Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 125
True/False Questions
1. When materials are purchased in a process costing system, a work in process account
is debited with the cost of the materials.
Answer: False Level: Easy LO: 1
2. Any difference in the equivalent units calculated under the weighted-average and the
FIFO methods is due to the units in the ending work in process inventory.
Answer: False Level: Easy LO: 2,6 Appendix: 4
3. The equivalent units in beginning work in process inventory plus the equivalent units
for the work done during the period equals the units transferred out plus the equivalent
units in ending work in process inventory.
Answer: True Level: Hard LO: 2
4. There is no difference in the unit costs computed under the weighted-average and
FIFO methods of process costing if there are no beginning work in process
inventories.
Answer: True Level: Hard LO: 4,8 Appendix: 4
5. Under the weighted-average method of process costing, costs from the prior period are
averaged with those of the current period in computing unit costs.
Answer: True Level: Medium LO: 4
6. In a process costing production report, the “Cost to be accounted for” will be the same
whether the weighted-average or the FIFO method is used.
Answer: True Level: Medium LO: 5,9 Appendix: 4
7. Under the FIFO method of product costing, equivalent units of production consider
units in the beginning inventory as if they were started and completed during the
current period.
Answer: False Level: Medium LO: 6 Appendix: 4
Chapter 4 Systems Design: Process Costing
126 Garrison, Managerial Accounting, 12th Edition
8. The production report of a company using the FIFO cost method likely would show
goods transferred from a department in two parts--one part consisting of units from the
beginning inventory completed and transferred, and the other part consisting of units
that were both started and completed during the month.
Answer: True Level: Medium LO: 7 Appendix: 4
9. In computing the cost per equivalent unit on the production report, costs in the
beginning work in process inventory are kept separate from current period costs when
the FIFO method is used.
Answer: True Level: Medium LO: 8 Appendix: 4
10. A major advantage of the FIFO method is that it allows managers to judge the
performance of the current period independently of the performance of the prior
period.
Answer: True Level: Medium LO: 9,10 Appendix: 4
11. Under a JIT inventory system, the differences between FIFO and weighted-average
costing methods are reduced.
Answer: True Level: Easy LO: 9,10 Appendix: 4
12. When the FIFO method is used to prepare a production report, costs to the next
department are accounted for in two separate blocks.
Answer: True Level: Easy LO: 9 Appendix: 4
13. Costs are accumulated by department in a process costing system.
Answer: True Level: Easy LO: 10
14. Operation costing is a hybrid system that employs certain aspects of both job-order
and process costing.
Answer: True Level: Easy LO: 10
15. Under job-order costing, costs are accumulated by department and are assigned
equally to all units passing through the department during the period.
Answer: False Level: Easy LO: 10
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 127
Multiple Choice Questions
16. Which of the following journal entries would be used to record direct labor costs in a
company having two processing departments (Department A and Department B)?
A) Work in Process XXX
Salaries and Wages Payable XXX
B) Salaries and Wages Expense XXX
Salaries and Wages Payable XXX
C) Work in Process-Department A XXX
Work in Process-Department B XXX
Salaries and Wages Payable XXX
D) Salaries and Wages Payable XXX
Work in Process XXX
Answer: C Level: Medium LO: 1
17. Which of the following journal entries would be used to record application of
manufacturing overhead to work in process in a process costing system with two
processing departments, department A and department B?
A) Manufacturing Overhead XXX
Work in Process–Department A XXX
Work in Process–Department B XXX
B) Work in Process–Department A XXX
Work in Process–Department B XXX
Manufacturing Overhead XXX
C) Work in Process–Department B XXX
Work in Process–Department A XXX
Manufacturing Overhead XXX
D) Work in Process–Department A XXX
Work in Process–Department B XXX
Manufacturing Overhead XXX
Answer: B Level: Easy LO: 1
18. Costs in an operation costing system are accumulated by:
A) department.
B) by individual job.
C) by both job and departments.
D) by neither job nor department.
Answer: C Level: Easy LO: 1
Chapter 4 Systems Design: Process Costing
128 Garrison, Managerial Accounting, 12th Edition
19. A process costing system was used for a department that began operations in January.
Approximately the same number of physical units, at the same degree of completion
were in work in process at the end of both January and February. Monthly conversion
costs are allocated between ending work in process and units completed. Compared to
the FIFO method, would the weighted-average method use the same or a greater
number of equivalent units to calculate the monthly allocations?
Equivalent units for weighted average compared to FIFO
January February
A) Same Same
B) Greater number Greater number
C) Greater number Same
D) Same Greater number
Answer: D Level: Hard LO: 2,6 Source: CPA, adapted Appendix: 4
20. The FIFO method provides a major advantage over the weighted-average method in
that:
A) the calculation of equivalent units is less complex under the FIFO method.
B) the FIFO method treats units in the beginning inventory as if they were started and
completed during the current period.
C) the FIFO method provides measurements of work done during the current period.
D) the weighted-average method ignores units in the beginning and ending work in
process inventories.
Answer: C Level: Medium LO: 2,6 Appendix: 4
21. The weighted-average method of process costing differs from the FIFO method of
process costing in that the weighted-average method:
A) can be used under any cost flow assumption.
B) does not require the use of predetermined overhead rates.
C) keeps costs in the beginning inventory separate from current period costs.
D) does not consider the degree of completion of units in the beginning work in
process inventory when computing equivalent units of production.
Answer: D Level: Medium LO: 2,6 Appendix: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 129
22. Which of the following statements about process costing system is incorrect?
A) In a process costing system, each processing department has a work in process
account.
B) In a process costing system, equivalent units are separately computed for materials
and for conversion costs.
C) In a process costing system, overhead can be under- or overapplied just as in joborder
costing.
D) In a process costing system, materials costs are traced to units of products.
Answer: D Level: Hard LO: 2,10
23. When the weighted-average method of process costing is used, a department's
equivalent units are computed by:
A) subtracting the equivalent units in beginning inventory from the equivalent units
in ending inventory.
B) subtracting the equivalent units in beginning inventory from the equivalent units
for work performed during the period.
C) adding the units transferred out to the equivalent units in ending inventory.
D) subtracting the equivalent units in beginning inventory from the sum of the units
transferred out and the equivalent units in ending inventory.
Answer: C Level: Medium LO: 2
24. Equivalent units for a process costing system using the FIFO method would be equal
to:
A) units completed during the period plus equivalent units in the ending work in
process inventory.
B) units started and completed during the period plus equivalent units in the ending
work in process inventory.
C) units completed during the period and transferred out.
D) units started and completed during the period plus equivalent units in the ending
work in process inventory plus work needed to complete units in the beginning
work in process inventory.
Answer: D Level: Medium LO: 6 Appendix: 4
Chapter 4 Systems Design: Process Costing
130 Garrison, Managerial Accounting, 12th Edition
25. Which of the following types of entities would be most likely to use a process costing
system?
A) a shipbuilder
B) a furniture manufacturer
C) a law firm
D) a utility producing natural gas
Answer: D Level: Easy LO: 10
26. Darvin Company uses the weighted-average method in its process costing system. The
first processing department, the Welding Department, started the month with 20,000
units in its beginning work in process inventory that were 10% complete with respect
to conversion costs. The conversion cost in this beginning work in process inventory
was $7,000. An additional 63,000 units were started into production during the month.
There were 10,000 units in the ending work in process inventory of the Welding
Department that were 10% complete with respect to conversion costs. A total of
$237,600 in conversion costs were incurred in the department during the month.
What would be the cost per equivalent unit for conversion costs for the month?
(Round off to three decimal places.)
A) $3.255
B) $3.771
C) $3.500
D) $3.305
Answer: D Level: Medium LO: 2,3,4
27. Dedra Company uses the weighted-average method in its process costing system. The
first processing department, the Welding Department, started the month with 10,000
units in its beginning work in process inventory that were 50% complete with respect
to conversion costs. The conversion cost in this beginning work in process inventory
was $37,500. An additional 98,000 units were started into production during the
month. There were 17,000 units in the ending work in process inventory of the
Welding Department that were 80% complete with respect to conversion costs. A total
of $727,080 in conversion costs were incurred in the department during the month.
What would be the cost per equivalent unit for conversion costs for the month?
(Round off to three decimal places.)
A) $6.322
B) $7.419
C) $7.500
D) $7.310
Answer: D Level: Medium LO: 2,3,4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 131
28. Luster Company uses the weighted-average method in its process costing system.
Operating data for the first processing department for the month of June appear below:
Units
Percentage
complete
Beginning work in process inventory .............. 13,000 40%
Started into production during June ................ 98,000
Ending work in process inventory ................... 11,000 30%
According to the company's records, the conversion cost in beginning work in process
inventory was $39,364 at the beginning of June. Additional conversion costs of
$721,035 were incurred in the department during the month.
What was the cost per equivalent unit for conversion costs for the month? (Round off
to three decimal places.)
A) $6.615
B) $7.358
C) $7.361
D) $7.570
Answer: C Level: Medium LO: 2,3,4
29. Lumdal Company uses the weighted-average method in its process costing system.
Operating data for the first processing department for the month of June appear below:
Units
Percentage
complete
Beginning work in process inventory .............. 10,000 90%
Started into production during June ................ 75,000
Ending work in process inventory ................... 17,000 40%
According to the company's records, the conversion cost in beginning work in process
inventory was $77,490 at the beginning of June. Additional conversion costs of
$552,062 were incurred in the department during the month.
What was the cost per equivalent unit for conversion costs for the month? (Round off
to three decimal places.)
A) $8.610
B) $7.361
C) $6.001
D) $8.416
Answer: D Level: Medium LO: 2,3,4
Chapter 4 Systems Design: Process Costing
132 Garrison, Managerial Accounting, 12th Edition
30. Boml Company uses the weighted-average method in its process costing system. The
Assembly Department started the month with 4,000 units in its beginning work in
process inventory that were 20% complete with respect to conversion costs. An
additional 62,000 units were transferred in from the prior department during the month
to begin processing in the Assembly Department. There were 14,000 units in the
ending work in process inventory of the Assembly Department that were 30%
complete with respect to conversion costs.
What were the equivalent units for conversion costs in the Assembly Department for
the month?
A) 56,200
B) 55,400
C) 72,000
D) 52,000
Answer: A Level: Medium LO: 2,3
31. Bricker Company uses the weighted-average method in its process costing system.
The Assembly Department started the month with 5,000 units in its beginning work in
process inventory that were 60% complete with respect to conversion costs. An
additional 81,000 units were transferred in from the prior department during the month
to begin processing in the Assembly Department. There were 18,000 units in the
ending work in process inventory of the Assembly Department that were 80%
complete with respect to conversion costs.
What were the equivalent units for conversion costs in the Assembly Department for
the month?
A) 79,400
B) 82,400
C) 94,000
D) 68,000
Answer: B Level: Medium LO: 2,3
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 133
32. Jinker Company uses the weighted-average method in its process costing system.
Operating data for the Painting Department for the month of April appear below:
Units
Percentage
complete
Beginning work in process inventory .............................. 6,700 50%
Transferred in from the prior department during April ... 57,800
Ending work in process inventory ................................... 7,600 60%
What were the equivalent units for conversion costs in the Painting Department for
April?
A) 56,900
B) 61,460
C) 62,360
D) 58,700
Answer: B Level: Medium LO: 2,3
33. Jumil Company uses the weighted-average method in its process costing system.
Operating data for the Painting Department for the month of April appear below:
Units
Percentage
complete
Beginning work in process inventory .............................. 4,700 40%
Transferred in from the prior department during April ... 56,600
Ending work in process inventory ................................... 6,300 60%
What were the equivalent units for conversion costs in the Painting Department for
April?
A) 58,200
B) 60,380
C) 58,780
D) 55,000
Answer: C Level: Medium LO: 2,3
Chapter 4 Systems Design: Process Costing
134 Garrison, Managerial Accounting, 12th Edition
34. Hafner Company uses the weighted-average method in its process costing system. The
first processing department, the Welding Department, started the month with 13,000
units in its beginning work in process inventory that were 80% complete with respect
to conversion costs. The conversion cost in this beginning work in process inventory
was $23,920. An additional 66,000 units were started into production during the
month and 68,000 units were completed in the Welding Department and transferred to
the next processing department. There were 11,000 units in the ending work in process
inventory of the Welding Department that were 30% complete with respect to
conversion costs. A total of $127,890 in conversion costs were incurred in the
department during the month.
What would be the cost per equivalent unit for conversion costs for the month?
(Round off to three decimal places.)
A) $2.129
B) $2.300
C) $1.661
D) $1.938
Answer: A Level: Medium LO: 2,4
35. Hall Company uses the weighted-average method in its process costing system. The
first processing department, the Welding Department, started the month with 18,000
units in its beginning work in process inventory that were 60% complete with respect
to conversion costs. The conversion cost in this beginning work in process inventory
was $64,800. An additional 84,000 units were started into production during the
month and 78,000 units were completed in the Welding Department and transferred to
the next processing department. There were 24,000 units in the ending work in process
inventory of the Welding Department that were 30% complete with respect to
conversion costs. A total of $431,520 in conversion costs were incurred in the
department during the month.
What would be the cost per equivalent unit for conversion costs for the month?
(Round off to three decimal places.)
A) $5.825
B) $3.996
C) $5.137
D) $6.000
Answer: A Level: Medium LO: 2,4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 135
36. Pajona Company uses the weighted-average method in its process costing system. The
Molding Department is the second department in its production process. The data
below summarize the department's operations in January.
Units
Percentage
complete
Beginning work in process inventory ..................... 7,400 60%
Transferred in from the prior department during
January ................................................................ 66,000
Completed and transferred to the next department
during January .................................................... 69,700
Ending work in process inventory .......................... 3,700 70%
The accounting records indicate that the conversion cost that had been assigned to
beginning work in process inventory was $31,302 and a total of $497,341 in
conversion costs were incurred in the department during January.
What was the cost per equivalent unit for conversion costs for January in the Molding
Department? (Round off to three decimal places.)
A) $7.535
B) $7.050
C) $7.313
D) $7.135
Answer: C Level: Medium LO: 2,4
Chapter 4 Systems Design: Process Costing
136 Garrison, Managerial Accounting, 12th Edition
37. Pampin Company uses the weighted-average method in its process costing system.
The Molding Department is the second department in its production process. The data
below summarize the department's operations in January.
Units
Percentage
complete
Beginning work in process inventory .............................. 9,600 50%
Transferred in from the prior department during
January ......................................................................... 43,000
Completed and transferred to the next department
during January ............................................................. 45,500
Ending work in process inventory ................................... 7,100 10%
The accounting records indicate that the conversion cost that had been assigned to
beginning work in process inventory was $17,328 and a total of $161,085 in
conversion costs were incurred in the department during January.
What was the cost per equivalent unit for conversion costs for January in the Molding
Department? (Round off to three decimal places.)
A) $3.610
B) $3.746
C) $3.215
D) $3.861
Answer: D Level: Medium LO: 2,4
38. Fabre Corporation uses the weighted-average method in its process costing system.
The Assembly Department started the month with 3,000 units in its beginning work in
process inventory that were 70% complete with respect to conversion costs. An
additional 90,000 units were transferred in from the prior department during the month
to begin processing in the Assembly Department. During the month 75,000 units were
completed in the Assembly Department and transferred to the next processing
department. There were 18,000 units in the ending work in process inventory of the
Assembly Department that were 50% complete with respect to conversion costs.
What were the equivalent units for conversion costs in the Assembly Department for
the month?
A) 105,000
B) 75,000
C) 84,000
D) 81,900
Answer: C Level: Easy LO: 2
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 137
39. Faivre Corporation uses the weighted-average method in its process costing system.
The Assembly Department started the month with 13,000 units in its beginning work
in process inventory that were 20% complete with respect to conversion costs. An
additional 55,000 units were transferred in from the prior department during the month
to begin processing in the Assembly Department. During the month 67,000 units were
completed in the Assembly Department and transferred to the next processing
department. There were 1,000 units in the ending work in process inventory of the
Assembly Department that were 50% complete with respect to conversion costs.
What were the equivalent units for conversion costs in the Assembly Department for
the month?
A) 43,000
B) 64,900
C) 67,000
D) 67,500
Answer: D Level: Easy LO: 2
40. Nabeth Corporation uses the weighted-average method in its process costing system.
Operating data for the Lubricating Department for the month of October appear
below:
Units
Percentage
complete
Beginning work in process inventory .............................. 7,700 80%
Transferred in from the prior department during
October ........................................................................ 48,800
Completed and transferred to the next department
during October ............................................................. 55,400
Ending work in process inventory ................................... 1,100 90%
What were the equivalent units for conversion costs in the Lubricating Department for
October?
A) 56,390
B) 42,200
C) 55,400
D) 49,790
Answer: A Level: Easy LO: 2
Chapter 4 Systems Design: Process Costing
138 Garrison, Managerial Accounting, 12th Edition
41. Naleer Corporation uses the weighted-average method in its process costing system.
Operating data for the Lubricating Department for the month of October appear
below:
Units
Percentage
complete
Beginning work in process inventory ............................. 3,400 30%
Transferred in from the prior department during
October ....................................................................... 49,500
Completed and transferred to the next department
during October ............................................................ 48,800
Ending work in process inventory .................................. 4,100 90%
What were the equivalent units for conversion costs in the Lubricating Department for
October?
A) 50,200
B) 48,800
C) 52,490
D) 53,190
Answer: C Level: Easy LO: 2
42. Sadanand Corporation uses the weighted-average method in its process costing
system. The Fitting Department is the second department in its production process.
The data below summarize the department's operations in March.
Units
Percentage
complete
Beginning work in process inventory ..................... 1,100 40%
Transferred in from the prior department during
March .................................................................. 46,000
Ending work in process inventory ........................... 4,600 30%
The Fitting Department's production report indicates that the cost per equivalent unit
for conversion cost for March was $9.24.
How much conversion cost was assigned to the units transferred out of the Fitting
Department during March?
A) $388,634.40
B) $425,040.00
C) $435,204.00
D) $392,700.00
Answer: D Level: Medium LO: 3,5
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 139
43. Sadron Corporation uses the weighted-average method in its process costing system.
The Fitting Department is the second department in its production process. The data
below summarize the department's operations in March.
Units
Percentage
complete
Beginning work in process inventory ..................... 6,200 20%
Transferred in from the prior department during
March .................................................................. 45,000
Ending work in process inventory .......................... 3,200 60%
The Fitting Department's production report indicates that the cost per equivalent unit
for conversion cost for March was $7.42.
How much conversion cost was assigned to the units transferred out of the Fitting
Department during March?
A) $356,160.00
B) $379,904.00
C) $333,900.00
D) $346,959.20
Answer: A Level: Medium LO: 3,5
44. The Assembly Department started the month with 59,000 units in its beginning work
in process inventory. An additional 367,000 units were transferred in from the prior
department during the month to begin processing in the Assembly Department. There
were 35,000 units in the ending work in process inventory of the Assembly
Department.
How many units were transferred to the next processing department during the month?
A) 391,000
B) 426,000
C) 343,000
D) 461,000
Answer: A Level: Easy LO: 3
Chapter 4 Systems Design: Process Costing
140 Garrison, Managerial Accounting, 12th Edition
45. The Assembly Department started the month with 78,000 units in its beginning work
in process inventory. An additional 254,000 units were transferred in from the prior
department during the month to begin processing in the Assembly Department. There
were 21,000 units in the ending work in process inventory of the Assembly
Department.
How many units were transferred to the next processing department during the month?
A) 332,000
B) 311,000
C) 197,000
D) 353,000
Answer: B Level: Easy LO: 3
46. Brooks Company uses the weighted-average method in its process costing system. The
beginning work in process inventory in a particular department consisted of 12,000
units, 100% complete with respect to materials cost and 40% complete with respect to
conversion costs. The total cost in the beginning work in process inventory was
$25,000. During the month, 50,000 units were completed and transferred out of the
department. The costs per equivalent unit were computed to be $1.50 for materials and
$3.20 for conversion costs. The total cost of the units completed and transferred out of
the department was:
A) $235,000.
B) $226,640.
C) $210,000.
D) $201,640.
Answer: A Level: Medium LO: 5
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 141
47. Rameau Corporation uses the weighted-average method in its process costing system.
The Molding Department is the second department in its production process. The data
below summarize the department's operations in January.
Units
Percentage
complete
Beginning work in process inventory .............................. 5,600 60%
Transferred in from the prior department during
January ......................................................................... 47,000
Completed and transferred to the next department
during January ............................................................. 50,300
Ending work in process inventory ................................... 2,300 40%
The Molding Department's production report indicates that the cost per equivalent unit
for conversion cost for January was $5.29.
How much conversion cost was assigned to the ending work in process inventory in
the Molding Department for January?
A) $7,300.20
B) $12,167.00
C) $11,849.60
D) $4,866.80
Answer: D Level: Easy LO: 5
Chapter 4 Systems Design: Process Costing
142 Garrison, Managerial Accounting, 12th Edition
48. Ramos Corporation uses the weighted-average method in its process costing system.
The Molding Department is the second department in its production process. The data
below summarize the department's operations in January.
Units
Percentage
complete
Beginning work in process inventory .............................. 2,800 40%
Transferred in from the prior department during
January ......................................................................... 45,000
Completed and transferred to the next department
during January ............................................................. 46,700
Ending work in process inventory ................................... 1,100 20%
The Molding Department's production report indicates that the cost per equivalent unit
for conversion cost for January was $1.12.
How much conversion cost was assigned to the ending work in process inventory in
the Molding Department for January?
A) $985.60
B) $1,881.60
C) $1,232.00
D) $246.40
Answer: D Level: Easy LO: 5
49. Ebart Company uses the FIFO method in its process costing system. The first
processing department, the Welding Department, started the month with 14,000 units
in its beginning work in process inventory that were 70% complete with respect to
conversion costs. The conversion cost in this beginning work in process inventory was
$20,580. An additional 53,000 units were started into production during the month.
There were 17,000 units in the ending work in process inventory of the Welding
Department that were 20% complete with respect to conversion costs. A total of
$80,660 in conversion costs were incurred in the department during the month.
What would be the cost per equivalent unit for conversion costs for the month on the
department's production report? (Round off to three decimal places.)
A) $1.522
B) $2.100
C) $1.850
D) $1.511
Answer: C Level: Medium LO: 6,7,8 Appendix: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 143
50. Eden Company uses the FIFO method in its process costing system. The first
processing department, the Welding Department, started the month with 10,000 units
in its beginning work in process inventory that were 50% complete with respect to
conversion costs. The conversion cost in this beginning work in process inventory was
$35,500. An additional 76,000 units were started into production during the month.
There were 10,000 units in the ending work in process inventory of the Welding
Department that were 80% complete with respect to conversion costs. A total of
$541,150 in conversion costs were incurred in the department during the month.
What would be the cost per equivalent unit for conversion costs for the month on the
department's production report? (Round off to three decimal places.)
A) $6.850
B) $7.120
C) $6.705
D) $7.100
Answer: A Level: Medium LO: 6,7,8 Appendix: 4
51. Maenhout Corporation uses the FIFO method in its process costing system. Operating
data for the Casting Department for the month of September appear below:
Units
Percentage
complete
Beginning work in process inventory .............................. 21,000 60%
Transferred in from the prior department during
September .................................................................... 64,000
Ending work in process inventory ................................... 22,000 70%
According to the company's records, the conversion cost in beginning work in process
inventory was $31,500 at the beginning of September. Additional conversion costs of
$172,396 were incurred in the department during the month.
What would be the cost per equivalent unit for conversion costs for September on the
Casting Department's production report? (Round off to three decimal places.)
A) $2.399
B) $2.694
C) $2.500
D) $2.620
Answer: D Level: Medium LO: 6,7,8 Appendix: 4
Chapter 4 Systems Design: Process Costing
144 Garrison, Managerial Accounting, 12th Edition
52. Maher Corporation uses the FIFO method in its process costing system. Operating
data for the Casting Department for the month of September appear below:
Units
Percentage
complete
Beginning work in process inventory .............................. 14,000 10%
Transferred in from the prior department during
September .................................................................... 97,000
Ending work in process inventory ................................... 22,000 70%
According to the company's records, the conversion cost in beginning work in process
inventory was $8,960 at the beginning of September. Additional conversion costs of
$671,560 were incurred in the department during the month.
What would be the cost per equivalent unit for conversion costs for September on the
Casting Department's production report? (Round off to three decimal places.)
A) $6.520
B) $6.923
C) $6.400
D) $6.131
Answer: A Level: Medium LO: 6,7,8 Appendix: 4
53. Camel Company uses the FIFO method in its process costing system. The Assembly
Department started the month with 5,000 units in its beginning work in process
inventory that were 80% complete with respect to conversion costs. An additional
62,000 units were transferred in from the prior department during the month to begin
processing in the Assembly Department. There were 2,000 units in the ending work in
process inventory of the Assembly Department that were 20% complete with respect
to conversion costs.
What were the equivalent units for conversion costs in the Assembly Department for
the month?
A) 65,400
B) 65,000
C) 59,000
D) 61,400
Answer: D Level: Medium LO: 6,7 Appendix: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 145
54. Cawper Company uses the FIFO method in its process costing system. The Assembly
Department started the month with 10,000 units in its beginning work in process
inventory that were 10% complete with respect to conversion costs. An additional
55,000 units were transferred in from the prior department during the month to begin
processing in the Assembly Department. There were 19,000 units in the ending work
in process inventory of the Assembly Department that were 20% complete with
respect to conversion costs.
What were the equivalent units for conversion costs in the Assembly Department for
the month?
A) 49,800
B) 48,800
C) 64,000
D) 46,000
Answer: B Level: Medium LO: 6,7 Appendix: 4
55. Kapstein Corporation uses the FIFO method in its process costing system. Operating
data for the Enameling Department for the month of May appear below:
Units
Percentage
complete
Beginning work in process inventory .............................. 6,400 10%
Transferred in from the prior department during May .... 51,200
Ending work in process inventory ................................... 3,800 40%
What were the equivalent units for conversion costs in the Enameling Department for
May?
A) 53,800
B) 48,600
C) 55,320
D) 54,680
Answer: D Level: Medium LO: 6,7 Appendix: 4
Chapter 4 Systems Design: Process Costing
146 Garrison, Managerial Accounting, 12th Edition
56. Kalra Corporation uses the FIFO method in its process costing system. Operating data
for the Enameling Department for the month of May appear below:
Units
Percentage
complete
Beginning work in process inventory .............................. 7,200 20%
Transferred in from the prior department during May .... 70,100
Ending work in process inventory ................................... 2,600 80%
What were the equivalent units for conversion costs in the Enameling Department for
May?
A) 65,500
B) 76,780
C) 74,700
D) 75,340
Answer: D Level: Medium LO: 6,7 Appendix: 4
57. Overhill Company uses the FIFO method in its process costing system. In the Cutting
Department in June, units were 80% complete with respect to conversion in the
beginning work in process inventory and 25% complete with respect to conversion in
the ending work in process inventory. Other data for the department for June follow:
Units
Conversion
Cost
Beginning work in process inventory .............................. 20,000 $40,000
Units started into production, and costs incurred during
the month ..................................................................... 150,000 $186,000
Units completed and transferred out ............................... 130,000
The cost per equivalent unit for conversion cost is closest to:
A) $1.48
B) $1.50
C) $1.16
D) $1.82
Answer: B Level: Medium LO: 6,8 Appendix: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 147
58. Inacio Corporation uses the FIFO method in its process costing system. The first
processing department, the Forming Department, started the month with 22,000 units
in its beginning work in process inventory that were 70% complete with respect to
conversion costs. The conversion cost in this beginning work in process inventory was
$38,500. An additional 71,000 units were started into production during the month and
72,000 units were completed and transferred to the next processing department. There
were 21,000 units in the ending work in process inventory of the Forming Department
that were 40% complete with respect to conversion costs. A total of $148,850 in
conversion costs were incurred in the department during the month.
What would be the cost per equivalent unit for conversion costs for the month on the
Forming Department's production report? (Round off to three decimal places.)
A) $2.500
B) $2.015
C) $2.096
D) $2.290
Answer: D Level: Medium LO: 6,8 Appendix: 4
59. Iyer Corporation uses the FIFO method in its process costing system. The first
processing department, the Forming Department, started the month with 14,000 units
in its beginning work in process inventory that were 20% complete with respect to
conversion costs. The conversion cost in this beginning work in process inventory was
$3,360. An additional 92,000 units were started into production during the month and
95,000 units were completed and transferred to the next processing department. There
were 11,000 units in the ending work in process inventory of the Forming Department
that were 10% complete with respect to conversion costs. A total of $92,367 in
conversion costs were incurred in the department during the month.
What would be the cost per equivalent unit for conversion costs for the month on the
Forming Department's production report? (Round off to three decimal places.)
A) $1.004
B) $0.990
C) $1.200
D) $0.903
Answer: B Level: Medium LO: 6,8 Appendix: 4
Chapter 4 Systems Design: Process Costing
148 Garrison, Managerial Accounting, 12th Edition
60. Qimper Corporation uses the FIFO method in its process costing system. Operating
data for the Cutting Department for the month of March appear below:
Units
Percentage
complete
Beginning work in process inventory ................................ 6,600 70%
Transferred in from the prior department during March ... 54,000
Completed and transferred to the next department during
March ............................................................................. 58,600
Ending work in process inventory ..................................... 2,000 40%
According to the company's records, the conversion cost in beginning work in process
inventory was $38,069 at the beginning of March. Additional conversion costs of
$444,047 were incurred in the department during the month.
What would be the cost per equivalent unit for conversion costs for March on the
Cutting Department's production report? (Round off to three decimal places.)
A) $7.956
B) $8.223
C) $8.106
D) $8.240
Answer: C Level: Medium LO: 6,8 Appendix: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 149
61. Quis Corporation uses the FIFO method in its process costing system. Operating data
for the Cutting Department for the month of March appear below:
Units
Percentage
complete
Beginning work in process inventory .......................... 9,600 70%
Transferred in from the prior department during
March ....................................................................... 47,000
Completed and transferred to the next department
during March ........................................................... 49,600
Ending work in process inventory ............................... 7,000 90%
According to the company's records, the conversion cost in beginning work in process
inventory was $26,880 at the beginning of March. Additional conversion costs of
$190,130 were incurred in the department during the month.
What would be the cost per equivalent unit for conversion costs for March on the
Cutting Department's production report? (Round off to three decimal places.)
A) $3.866
B) $3.834
C) $4.045
D) $4.000
Answer: A Level: Medium LO: 6,8 Appendix: 4
62. Williams Company uses the FIFO method in its process costing system. The
beginning work in process inventory in a particular department consisted of 10,000
units, 100% complete with respect to materials and 60% with respect to conversion
costs. The total cost in the beginning work in process inventory was $48,200. During
the month, 25,000 units were transferred out of the department. The costs per
equivalent unit were computed to be $3.10 for materials and $4.50 for conversion
costs. The total cost of the units completed and transferred out of the department was:
A) $190,000
B) $189,200
C) $180,200
D) $132,000
Answer: C Level: Hard LO: 6,9 Appendix: 4
Chapter 4 Systems Design: Process Costing
150 Garrison, Managerial Accounting, 12th Edition
63. Walden Company has a process costing system and uses the FIFO method. All
materials are introduced at the beginning of the process in Department One. The
following information is available for the month of January for Department One:
Units
Work in process, January 1 (conversion 40% complete) ..... 500
Started in January ................................................................. 2,000
Transferred to Department Two during January .................. 2,100
Work in process, January 31 (conversion 25% complete) ... 400
What are the equivalent units for the month of January?
Materials Conversion Cost
A) 2,500 2,200
B) 2,500 1,900
C) 2,000 2,200
D) 2,000 2,000
Answer: D Level: Medium LO: 6 Source: CPA, adapted Appendix: 4
64. Mann Company uses the FIFO method in its process costing system. Department A is
the first stage of the company's production process. The following information is
available for conversion costs for the month of April in Department A:
Units
Work in process, beginning (60% complete) .................. 20,000
Started in April ................................................................ 340,000
Completed in April and transferred to Department B ..... 320,000
Work in process, ending (40% complete) ....................... 40,000
The equivalent units for conversion costs are:
A) 320,000
B) 324,000
C) 336,000
D) 360,000
Answer: B Level: Easy LO: 6 Source: CPA, adapted Appendix: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 151
65. Laurie Company uses the FIFO method in its process costing system. Department A is
the first stage of Laurie Company's production process. The following information is
available for conversion costs for the month of May for Department A:
Units
Work in process, beginning (conversion 25% complete) ..... 8,000
Started in May ...................................................................... 40,000
Completed in May and transferred to Department B ........... 38,000
Work in process, ending (conversion 60% complete) .......... 10,000
The equivalent units of production for conversion costs for the month are:
A) 42,000 units
B) 38,000 units
C) 44,000 units
D) 36,000 units
Answer: A Level: Medium LO: 6 Appendix: 4
66. Richardson Company uses the FIFO method in its process costing system. During
June, 40,000 units were completed in Department M. Of this total, 5,000 were in the
beginning work in process and the remainder were started and completed during the
month. Materials are added at the beginning of the process. A total of 10,000 units
were in work in process at June 30; these units were 80% complete with respect to
conversion costs. The work in process at June 1 was 40% complete with respect to
conversion costs. The equivalent units for conversion costs were:
A) 39,000 units
B) 45,000 units
C) 46,000 units
D) 48,000 units
Answer: C Level: Medium LO: 6 Appendix: 4
Chapter 4 Systems Design: Process Costing
152 Garrison, Managerial Accounting, 12th Edition
67. Gabel Corporation uses the FIFO method in its process costing system. The Grinding
Department started the month with 10,000 units in its beginning work in process
inventory that were 70% complete with respect to conversion costs. An additional
85,000 units were transferred in from the prior department during the month to begin
processing in the Grinding Department. During the month 81,000 units were
completed in the Grinding Department and transferred to the next processing
department. There were 14,000 units in the ending work in process inventory of the
Grinding Department that were 90% complete with respect to conversion costs.
What were the equivalent units for conversion costs in the Grinding Department for
the month?
A) 86,600
B) 93,600
C) 81,000
D) 89,000
Answer: A Level: Medium LO: 6 Appendix: 4
68. Gabriel Corporation uses the FIFO method in its process costing system. The Grinding
Department started the month with 15,000 units in its beginning work in process
inventory that were 70% complete with respect to conversion costs. An additional
58,000 units were transferred in from the prior department during the month to begin
processing in the Grinding Department. During the month 64,000 units were
completed in the Grinding Department and transferred to the next processing
department. There were 9,000 units in the ending work in process inventory of the
Grinding Department that were 90% complete with respect to conversion costs.
What were the equivalent units for conversion costs in the Grinding Department for
the month?
A) 64,000
B) 72,100
C) 61,600
D) 52,000
Answer: C Level: Medium LO: 6 Appendix: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 153
69. Osman Company uses the FIFO method in its process costing system. Operating data
for the Brazing Department for the month of November appear below:
Units
Percentage
complete
Beginning work in process inventory .............................. 7,600 30%
Transferred in from the prior department during
November .................................................................... 52,700
Completed and transferred to the next department
during November ......................................................... 54,000
Ending work in process inventory ................................... 6,300 80%
What were the equivalent units for conversion costs in the Brazing Department for
November?
A) 59,040
B) 54,000
C) 56,760
D) 51,400
Answer: C Level: Medium LO: 6 Appendix: 4
70. Oreilley Company uses the FIFO method in its process costing system. Operating data
for the Brazing Department for the month of November appear below:
Units
Percentage
complete
Beginning work in process inventory .............................. 5,300 30%
Transferred in from the prior department during
November .................................................................... 30,000
Completed and transferred to the next department
during November ......................................................... 32,500
Ending work in process inventory ................................... 2,800 70%
What were the equivalent units for conversion costs in the Brazing Department for
November?
A) 34,460
B) 32,500
C) 27,500
D) 32,870
Answer: D Level: Medium LO: 6 Appendix: 4
Chapter 4 Systems Design: Process Costing
154 Garrison, Managerial Accounting, 12th Edition
71. Steven Company uses the FIFO method in its process costing system. Department A's
beginning work in process inventory consisted of 15,000 units, 100% complete with
respect to materials and 40% complete with respect to conversion costs. The total
dollar value of this inventory was $31,000. A total of 40,000 units were transferred out
during the month. The costs per equivalent unit were computed to be $1.30 for
materials and $2.20 for conversion costs. The cost of the units completed and
transferred out was:
A) $140,000
B) $138,300
C) $131,700
D) $118,500
Answer: B Level: Medium LO: 9 Appendix: 4
72. Marlow Company uses the FIFO method in its process costing system. Department
A's beginning work in process inventory consisted of 12,000 units, 100% complete
with respect to materials cost and 60% complete with respect to conversion costs. The
total cost in the beginning work in process inventory was $56,400. A total of 25,000
units were transferred out during the month. The cost per equivalent unit was
computed to be $3.40 for materials and $4.70 for conversion costs. The total cost of
the units completed and transferred out was:
A) $195,540
B) $146,100
C) $202,500
D) $184,260
Answer: D Level: Medium LO: 9 Appendix: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 155
73. Tanner Corporation uses the FIFO method in its process costing system. Operating
data for the Curing Department for the month of March appear below:
Units
Percentage
complete
Beginning work in process inventory .............................. 8,200 80%
Transferred in from the prior department during March . 52,000
Completed and transferred to the next department
during March ............................................................... 54,200
Ending work in process inventory ................................... 6,000 50%
According to the company's records, the conversion cost in beginning work in process
inventory was $7,872 at the beginning of March. The cost per equivalent unit for
conversion costs for March was $1.10.
How much conversion cost would be assigned to the units completed and transferred
out of the department during March?
A) $52,404
B) $59,620
C) $60,276
D) $57,200
Answer: C Level: Medium LO: 9 Appendix: 4
Chapter 4 Systems Design: Process Costing
156 Garrison, Managerial Accounting, 12th Edition
74. Tanguy Corporation uses the FIFO method in its process costing system. Operating
data for the Curing Department for the month of March appear below:
Units
Percentage
complete
Beginning work in process inventory .............................. 2,500 70%
Transferred in from the prior department during March . 44,000
Completed and transferred to the next department
during March ............................................................... 38,500
Ending work in process inventory ................................... 8,000 10%
According to the company's records, the conversion cost in beginning work in process
inventory was $7,350 at the beginning of March. The cost per equivalent unit for
conversion costs for March was $4.10.
How much conversion cost would be assigned to the units completed and transferred
out of the department during March?
A) $150,675
B) $180,400
C) $158,025
D) $157,850
Answer: C Level: Medium LO: 9 Appendix: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 157
Use the following to answer questions 75-80:
Annenbaum Corporation uses the weighted-average method in its process costing system.
This month, the beginning inventory in the first processing department consisted of 400 units.
The costs and percentage completion of these units in beginning inventory were:
Cost
Percent
Complete
Materials costs ................... $5,700 65%
Conversion costs ............... $6,800 45%
A total of 6,500 units were started and 5,900 units were transferred to the second processing
department during the month. The following costs were incurred in the first processing
department during the month:
Materials costs ................... $125,500
Conversion costs ............... $207,000
The ending inventory was 50% complete with respect to materials and 35% complete with
respect to conversion costs.
Note: Your answers may differ from those offered below due to rounding error. In all cases,
select the answer that is the closest to the answer you computed. To reduce rounding error,
carry out all computations to at least three decimal places.
75. What are the equivalent units for conversion costs for the month in the first processing
department?
A) 6,250
B) 5,900
C) 350
D) 6,900
Answer: A Level: Medium LO: 2,3
76. The cost per equivalent unit for materials for the month in the first processing
department is closest to:
A) $19.01
B) $19.61
C) $20.50
D) $18.19
Answer: C Level: Medium LO: 4
Chapter 4 Systems Design: Process Costing
158 Garrison, Managerial Accounting, 12th Edition
77. The cost per equivalent unit for conversion costs for the first department for the month
is closest to:
A) $30.99
B) $35.92
C) $33.12
D) $34.21
Answer: D Level: Medium LO: 4
78. The cost per equivalent whole unit for the month in the first processing department is
closest to:
A) $58.47
B) $50.00
C) $57.99
D) $54.71
Answer: D Level: Medium LO: 4
79. The total cost transferred from the first processing department to the next processing
department during the month is closest to:
A) $332,500
B) $345,000
C) $322,777
D) $377,485
Answer: C Level: Medium LO: 5
80. The cost of ending work in process inventory in the first processing department
according to the company's cost system is closest to:
A) $19,148
B) $22,223
C) $54,708
D) $27,354
Answer: B Level: Medium LO: 5
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 159
Use the following to answer questions 81-87:
Bistrol Corporation uses the weighted-average method in its process costing system. This
month, the beginning inventory in the first processing department consisted of 800 units. The
costs and percentage completion of these units in beginning inventory were:
Cost
Percent
Complete
Materials costs ................... $15,700 75%
Conversion costs ............... $7,700 20%
A total of 8,400 units were started and 7,500 units were transferred to the second processing
department during the month. The following costs were incurred in the first processing
department during the month:
Materials costs ................... $186,300
Conversion costs ............... $329,800
The ending inventory was 70% complete with respect to materials and 60% complete with
respect to conversion costs.
Note: Your answers may differ from those offered below due to rounding error. In all cases,
select the answer that is the closest to the answer you computed. To reduce rounding error,
carry out all computations to at least three decimal places.
81. How many units are in ending work in process inventory in the first processing
department at the end of the month?
A) 7,600
B) 900
C) 1,700
D) 900
Answer: C Level: Easy LO: 3
82. What are the equivalent units for conversion costs for the month in the first processing
department?
A) 9,200
B) 8,520
C) 7,500
D) 1,020
Answer: B Level: Medium LO: 2
Chapter 4 Systems Design: Process Costing
160 Garrison, Managerial Accounting, 12th Edition
83. The cost per equivalent unit for materials for the month in the first processing
department is closest to:
A) $21.44
B) $21.96
C) $20.25
D) $23.25
Answer: D Level: Medium LO: 4
84. The cost per equivalent unit for conversion costs for the first department for the month
is closest to:
A) $41.59
B) $38.71
C) $39.61
D) $36.68
Answer: C Level: Medium LO: 4
85. The cost per equivalent whole unit for the month in the first processing department is
closest to:
A) $71.93
B) $62.86
C) $58.64
D) $66.63
Answer: B Level: Medium LO: 4
86. The total cost transferred from the first processing department to the next processing
department during the month is closest to:
A) $516,100
B) $471,435
C) $539,500
D) $578,294
Answer: B Level: Medium LO: 5
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 161
87. The cost of ending work in process inventory in the first processing department
according to the company's cost system is closest to:
A) $68,067
B) $64,115
C) $74,801
D) $106,859
Answer: A Level: Medium LO: 5
Use the following to answer questions 88-91:
Carpenter Corporation uses the weighted-average method in its process costing system. This
month, the beginning inventory in the first processing department consisted of 600 units. The
costs and percentage completion of these units in beginning inventory were:
Cost
Percent
Complete
Materials costs ................... $5,200 60%
Conversion costs ............... $8,500 55%
A total of 7,800 units were started and 7,100 units were transferred to the second processing
department during the month. The following costs were incurred in the first processing
department during the month:
Materials costs ................... $95,000
Conversion costs ............... $169,200
The ending inventory was 85% complete with respect to materials and 70% complete with
respect to conversion costs.
Note: Your answers may differ from those offered below due to rounding error. In all cases,
select the answer that is the closest to the answer you computed. To reduce rounding error,
carry out all computations to at least three decimal places.
88. How many units are in ending work in process inventory in the first processing
department at the end of the month?
A) 1,300
B) 900
C) 7,200
D) 700
Answer: A Level: Easy LO: 3
Chapter 4 Systems Design: Process Costing
162 Garrison, Managerial Accounting, 12th Edition
89. What are the equivalent units for conversion costs for the month in the first processing
department?
A) 910
B) 8,010
C) 7,100
D) 8,400
Answer: B Level: Medium LO: 2
90. The cost per equivalent unit for materials for the month in the first processing
department is closest to:
A) $11.31
B) $12.21
C) $11.58
D) $11.93
Answer: B Level: Medium LO: 4
91. The total cost transferred from the first processing department to the next processing
department during the month is closest to:
A) $264,200
B) $244,219
C) $288,935
D) $277,900
Answer: B Level: Medium LO: 5
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 163
Use the following to answer questions 92-94:
Esty Corporation uses the weighted-average method in its process costing system. This
month, the beginning inventory in the first processing department consisted of 800 units. The
costs and percentage completion of these units in beginning inventory were:
Cost
Percent
Complete
Materials costs ................... $5,800 50%
Conversion costs ............... $6,500 30%
A total of 7,700 units were started and 6,600 units were transferred to the second processing
department during the month. The following costs were incurred in the first processing
department during the month:
Materials costs ................... $85,300
Conversion costs ............... $168,000
The ending inventory was 70% complete with respect to materials and 10% complete with
respect to conversion costs.
Note: Your answers may differ from those offered below due to rounding error. In all cases,
select the answer that is the closest to the answer you computed. To reduce rounding error,
carry out all computations to at least three decimal places.
92. What are the equivalent units for conversion costs for the month in the first processing
department?
A) 6,790
B) 8,500
C) 6,600
D) 190
Answer: A Level: Medium LO: 2,3
93. The cost per equivalent unit for materials for the month in the first processing
department is closest to:
A) $10.76
B) $10.04
C) $10.72
D) $11.49
Answer: D Level: Medium LO: 4
Chapter 4 Systems Design: Process Costing
164 Garrison, Managerial Accounting, 12th Edition
94. The total cost transferred from the first processing department to the next processing
department during the month is closest to:
A) $253,300
B) $245,441
C) $316,098
D) $265,600
Answer: B Level: Medium LO: 4
Use the following to answer questions 95-96:
Fuller Corporation uses the weighted-average method in its process costing system. This
month, the beginning inventory in the first processing department consisted of 700 units. The
costs and percentage completion of these units in beginning inventory were:
Cost
Percent
Complete
Materials costs ................... $12,700 85%
Conversion costs ............... $10,900 30%
A total of 9,800 units were started and 8,800 units were transferred to the second processing
department during the month. The following costs were incurred in the first processing
department during the month:
Materials costs ................... $175,600
Conversion costs ............... $420,900
The ending inventory was 85% complete with respect to materials and 70% complete with
respect to conversion costs.
Note: Your answers may differ from those offered below due to rounding error. In all cases,
select the answer that is the closest to the answer you computed. To reduce rounding error,
carry out all computations to at least three decimal places.
95. The total cost transferred from the first processing department to the next processing
department during the month is closest to:
A) $620,100
B) $646,832
C) $542,106
D) $596,500
Answer: C Level: Medium LO: 2,3,4,5
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 165
96. The cost of ending work in process inventory in the first processing department
according to the company's cost system is closest to:
A) $77,994
B) $73,308
C) $104,725
D) $89,016
Answer: A Level: Medium LO: 2,3,4,5
Use the following to answer questions 97-104:
Gunes Corporation uses the weighted-average method in its process costing system. This
month, the beginning inventory in the first processing department consisted of 800 units. The
costs and percentage completion of these units in beginning inventory were:
Cost
Percent
Complete
Materials costs ................... $10,600 65%
Conversion costs ............... $12,800 30%
A total of 8,500 units were started and 7,400 units were transferred to the second processing
department during the month. The following costs were incurred in the first processing
department during the month:
Materials costs ................... $142,100
Conversion costs ............... $359,500
The ending inventory was 50% complete with respect to materials and 35% complete with
respect to conversion costs.
Note: Your answers may differ from those offered below due to rounding error. In all cases,
select the answer that is the closest to the answer you computed. To reduce rounding error,
carry out all computations to at least three decimal places.
97. How many units are in ending work in process inventory in the first processing
department at the end of the month?
A) 1,900
B) 1,100
C) 7,700
D) 900
Answer: A Level: Easy LO: 3
Chapter 4 Systems Design: Process Costing
166 Garrison, Managerial Accounting, 12th Edition
98. What are the equivalent units for materials for the month in the first processing
department?
A) 7,400
B) 9,300
C) 8,350
D) 950
Answer: C Level: Medium LO: 2
99. What are the equivalent units for conversion costs for the month in the first processing
department?
A) 9,300
B) 8,065
C) 7,400
D) 665
Answer: B Level: Medium LO: 2
100. The cost per equivalent unit for materials for the month in the first processing
department is closest to:
A) $18.29
B) $17.02
C) $16.42
D) $15.28
Answer: A Level: Medium LO: 4
101. The cost per equivalent unit for conversion costs for the first department for the month
is closest to:
A) $40.03
B) $46.16
C) $44.58
D) $48.47
Answer: B Level: Medium LO: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 167
102. The cost per equivalent whole unit for the month in the first processing department is
closest to:
A) $64.45
B) $56.45
C) $68.32
D) $70.95
Answer: A Level: Medium LO: 4
103. The total cost transferred from the first processing department to the next processing
department during the month is closest to:
A) $476,923
B) $599,376
C) $501,600
D) $525,000
Answer: A Level: Medium LO: 5
104. The cost of ending work in process inventory in the first processing department
according to the company's cost system is closest to:
A) $61,227
B) $48,071
C) $42,859
D) $122,453
Answer: B Level: Medium LO: 5
Chapter 4 Systems Design: Process Costing
168 Garrison, Managerial Accounting, 12th Edition
Use the following to answer questions 105-107:
Domingo Corporation uses the weighted-average method in its process costing system. This
month, the beginning inventory in the first processing department consisted of 400 units. The
costs and percentage completion of these units in beginning inventory were:
Cost
Percent
Complete
Materials costs ................... $5,500 50%
Conversion costs ............... $1,700 20%
A total of 6,800 units were started and 6,100 units were transferred to the second processing
department during the month. The following costs were incurred in the first processing
department during the month:
Materials costs ................... $158,700
Conversion costs ............... $120,400
The ending inventory was 85% complete with respect to materials and 75% complete with
respect to conversion costs.
Note: Your answers may differ from those offered below due to rounding error. In all cases,
select the answer that is the closest to the answer you computed. To reduce rounding error,
carry out all computations to at least three decimal places.
105. How many units are in ending work in process inventory in the first processing
department at the end of the month?
A) 700
B) 900
C) 6,400
D) 1,100
Answer: D Level: Easy LO: 3
106. What are the equivalent units for conversion costs for the month in the first processing
department?
A) 7,200
B) 6,925
C) 6,100
D) 825
Answer: B Level: Medium LO: 2
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 169
107. The cost per equivalent unit for materials for the month in the first processing
department is closest to:
A) $22.04
B) $22.81
C) $23.34
D) $22.56
Answer: C Level: Medium LO: 4
Use the following to answer questions 108-114:
Haffner Corporation uses the weighted-average method in its process costing system. Data
concerning the first processing department for the most recent month are listed below:
Beginning work in process inventory:
Units in beginning work in process inventory ....................... 500
Materials costs ........................................................................ $7,800
Conversion costs .................................................................... $9,100
Percentage complete with respect to materials ...................... 85%
Percentage complete with respect to conversion ................... 55%
Units started into production during the month ........................ 7,000
Units transferred to the next department during the month ...... 6,100
Materials costs added during the month .................................... $102,700
Conversion costs added during the month ................................ $184,400
Ending work in process inventory:
Units in ending work in process inventory ............................ 1,400
Percentage complete with respect to materials ...................... 60%
Percentage complete with respect to conversion ................... 50%
Note: Your answers may differ from those offered below due to rounding error. In all cases,
select the answer that is the closest to the answer you computed. To reduce rounding error,
carry out all computations to at least three decimal places.
108. What are the equivalent units for materials for the month in the first processing
department?
A) 840
B) 6,940
C) 7,500
D) 6,100
Answer: B Level: Medium LO: 2
Chapter 4 Systems Design: Process Costing
170 Garrison, Managerial Accounting, 12th Edition
109. What are the equivalent units for conversion costs for the month in the first processing
department?
A) 6,100
B) 700
C) 6,800
D) 7,500
Answer: C Level: Medium LO: 2
110. The cost per equivalent unit for materials for the month in the first processing
department is closest to:
A) $15.92
B) $14.80
C) $13.69
D) $14.73
Answer: A Level: Medium LO: 4
111. The cost per equivalent unit for conversion costs for the first department for the month
is closest to:
A) $28.46
B) $25.80
C) $29.88
D) $27.12
Answer: A Level: Medium LO: 4
112. The cost per equivalent whole unit for the month in the first processing department is
closest to:
A) $40.53
B) $47.04
C) $44.38
D) $49.84
Answer: C Level: Medium LO: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 171
113. The total cost transferred from the first processing department to the next processing
department during the month is closest to:
A) $304,000
B) $332,835
C) $270,706
D) $287,100
Answer: C Level: Medium LO: 5
114. The cost of ending work in process inventory in the first processing department
according to the company's cost system is closest to:
A) $37,278
B) $33,293
C) $62,129
D) $31,065
Answer: B Level: Medium LO: 5
Use the following to answer questions 115-116:
Kurtulus Corporation uses the weighted-average method in its process costing system. Data
concerning the first processing department for the most recent month are listed below:
Beginning work in process inventory:
Units in beginning work in process inventory ........................ 600
Materials costs ......................................................................... $7,000
Conversion costs ..................................................................... $2,300
Percentage complete with respect to materials ....................... 55%
Percentage complete with respect to conversion .................... 25%
Units started into production during the month ......................... 6,500
Units transferred to the next department during the month ....... 5,700
Materials costs added during the month ..................................... $110,100
Conversion costs added during the month ................................. $83,200
Ending work in process inventory:
Units in ending work in process inventory ............................. 1,400
Percentage complete with respect to materials ....................... 70%
Percentage complete with respect to conversion .................... 55%
Note: Your answers may differ from those offered below due to rounding error. In all cases,
select the answer that is the closest to the answer you computed. To reduce rounding error,
carry out all computations to at least three decimal places.
Chapter 4 Systems Design: Process Costing
172 Garrison, Managerial Accounting, 12th Edition
115. The total cost transferred from the first processing department to the next processing
department during the month is closest to:
A) $202,600
B) $193,300
C) $175,247
D) $218,290
Answer: C Level: Medium LO: 2,4,5
116. The cost of ending work in process inventory in the first processing department
according to the company's cost system is closest to:
A) $23,674
B) $43,043
C) $30,130
D) $27,355
Answer: D Level: Medium LO: 2,4,5
Use the following to answer questions 117-120:
Lucas Corporation uses the weighted-average method in its process costing system. Data
concerning the first processing department for the most recent month are listed below:
Beginning work in process inventory:
Units in beginning work in process inventory ........................... 900
Materials costs ............................................................................ $9,600
Conversion costs ........................................................................ $7,700
Percentage complete with respect to materials .......................... 60%
Percentage complete with respect to conversion ....................... 45%
Units started into production during the month ............................ 8,100
Units transferred to the next department during the month .......... 6,900
Materials costs added during the month ........................................ $115,800
Conversion costs added during the month .................................... $120,500
Ending work in process inventory:
Units in ending work in process inventory ................................ 2,100
Percentage complete with respect to materials .......................... 75%
Percentage complete with respect to conversion ....................... 20%
Note: Your answers may differ from those offered below due to rounding error. In all cases,
select the answer that is the closest to the answer you computed. To reduce rounding error,
carry out all computations to at least three decimal places.
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 173
117. What are the equivalent units for materials for the month in the first processing
department?
A) 9,000
B) 1,575
C) 6,900
D) 8,475
Answer: D Level: Medium LO: 2
118. The cost per equivalent unit for conversion costs for the first department for the month
is closest to:
A) $18.39
B) $16.46
C) $17.51
D) $14.24
Answer: C Level: Medium LO: 4
119. The cost per equivalent whole unit for the month in the first processing department is
closest to:
A) $28.18
B) $36.75
C) $32.31
D) $34.25
Answer: C Level: Medium LO: 4
120. The cost of ending work in process inventory in the first processing department
according to the company's cost system is closest to:
A) $13,570
B) $50,888
C) $30,660
D) $67,851
Answer: C Level: Medium LO: 5
Chapter 4 Systems Design: Process Costing
174 Garrison, Managerial Accounting, 12th Edition
Use the following to answer questions 121-122:
Inacio Corporation uses the weighted-average method in its process costing system. Data
concerning the first processing department for the most recent month are listed below:
Beginning work in process inventory:
Units in beginning work in process inventory ..................... 800
Materials costs ...................................................................... $12,900
Conversion costs .................................................................. $5,000
Percentage complete with respect to materials .................... 75%
Percentage complete with respect to conversion ................. 20%
Units started into production during the month ...................... 9,500
Units transferred to the next department during the month .... 8,400
Materials costs added during the month .................................. $172,000
Conversion costs added during the month .............................. $240,200
Ending work in process inventory:
Units in ending work in process inventory .......................... 1,900
Percentage complete with respect to materials .................... 90%
Percentage complete with respect to conversion ................. 30%
Note: Your answers may differ from those offered below due to rounding error. In all cases,
select the answer that is the closest to the answer you computed. To reduce rounding error,
carry out all computations to at least three decimal places.
121. What are the equivalent units for conversion costs for the month in the first processing
department?
A) 8,400
B) 8,970
C) 570
D) 10,300
Answer: B Level: Medium LO: 2
122. The cost per equivalent unit for materials for the month in the first processing
department is closest to:
A) $17.01
B) $17.95
C) $16.70
D) $18.29
Answer: D Level: Medium LO: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 175
Use the following to answer questions 123-124:
Joos Corporation uses the weighted-average method in its process costing system. Data
concerning the first processing department for the most recent month are listed below:
Beginning work in process inventory:
Units in beginning work in process inventory .......................... 600
Materials costs ........................................................................... $7,300
Conversion costs ....................................................................... $2,300
Percentage complete with respect to materials ......................... 50%
Percentage complete with respect to conversion ...................... 10%
Units started into production during the month ........................... 9,400
Units transferred to the next department during the month ......... 8,600
Materials costs added during the month ....................................... $196,300
Conversion costs added during the month ................................... $315,800
Ending work in process inventory:
Units in ending work in process inventory ............................... 1,400
Percentage complete with respect to materials ......................... 70%
Percentage complete with respect to conversion ...................... 40%
Note: Your answers may differ from those offered below due to rounding error. In all cases,
select the answer that is the closest to the answer you computed. To reduce rounding error,
carry out all computations to at least three decimal places.
123. The cost per equivalent unit for materials for the month in the first processing
department is closest to:
A) $19.63
B) $21.25
C) $20.36
D) $20.49
Answer: B Level: Medium LO: 2,4
124. The cost per equivalent unit for conversion costs for the first department for the month
is closest to:
A) $31.81
B) $34.73
C) $34.48
D) $36.47
Answer: B Level: Medium LO: 2,4
Chapter 4 Systems Design: Process Costing
176 Garrison, Managerial Accounting, 12th Edition
Use the following to answer questions 125-128:
Harward Company's Staining department recorded the following activity in June:
Number of
Units
Labor and
Overhead Percent
Completed
Work in process inventory, June 1 ............ 8,000 35%
Started into production during June .......... 50,000
Work in process inventory, June 30 .......... 12,000 55%
All materials are added at the beginning of the process in the Staining Department.
125. The equivalent units for labor and overhead for June, using the FIFO method, were:
A) 46,000 units
B) 49,800 units
C) 43,200 units
D) 52,600 units
Answer: B Level: Medium LO: 6 Appendix: 4
126. The equivalent units for labor and overhead for June, using the weighted-average
method, were:
A) 52,600 units
B) 62,000 units
C) 50,000 units
D) 46,000 units
Answer: A Level: Medium LO: 2 Appendix: 4
127. The equivalent units for materials for June, using the FIFO method, were:
A) 46,000 units
B) 42,000 units
C) 58,000 units
D) 50,000 units
Answer: D Level: Medium LO: 6 Appendix: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 177
128. The equivalent units for materials for June, using the weighted-average method, were:
A) 58,000 units
B) 52,600 units
C) 46,000 units
D) 60,000 units
Answer: A Level: Medium LO: 2 Appendix: 4
Use the following to answer questions 129-132:
Activity in Saggers Company's Assembly Department for the month of March follows:
Percent Complete
Units Materials
Labor &
Overhead
Work in process inventory, March 1 ............... 6,000 60% 45%
Started into production during March ............. 65,000
Work in process inventory, March 31 ............. 4,000 35% 20%
129. The equivalent units for labor and overhead for March, using the weighted-average
method, are:
A) 69,600 units
B) 67,800 units
C) 71,000 units
D) 69,000 units
Answer: B Level: Medium LO: 2 Appendix: 4
130. The equivalent units for materials for March, using the weighted-average method, are:
A) 69,000 units
B) 65,000 units
C) 68,400 units
D) 67,000 units
Answer: C Level: Medium LO: 2 Appendix: 4
131. The equivalent units for labor and overhead for March, using the FIFO method, are:
A) 63,100 units
B) 65,000 units
C) 62,500 units
D) 65,100 units
Answer: D Level: Medium LO: 6 Appendix: 4
Chapter 4 Systems Design: Process Costing
178 Garrison, Managerial Accounting, 12th Edition
132. The equivalent units for materials for March, using the FIFO method, are:
A) 64,800 units
B) 59,800 units
C) 66,000 units
D) 67,200 units
Answer: A Level: Medium LO: 6 Appendix: 4
Use the following to answer questions 133-136:
Levitt Company uses a process costing system. All direct materials are added at the beginning
of the process. Levitt's production quantity schedule for November is reproduced below.
Units
Work-in-process on November 1 (conversion 60% complete) ........ 1,000
Units started during November ........................................................ 5,000
Total units to account for ................................................................. 6,000
Units completed and transferred out from beginning inventory ...... 1,000
Units started and completed during November ................................ 3,000
Work-in-process on November 30 (conversion 20% complete) ...... 2,000
Total units accounted for .................................................................. 6,000
133. Using the FIFO method, the equivalent units for direct materials for November are:
A) 5,000 units
B) 6,000 units
C) 4,400 units
D) 3,800 units
Answer: A Level: Medium LO: 6 Source: CMA, adapted Appendix: 4
134. Using the FIFO method, the equivalent units for conversion costs for November are:
A) 3,400 units
B) 3,800 units
C) 4,000 units
D) 4,400 units
Answer: B Level: Medium LO: 6 Source: CMA, adapted Appendix: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 179
135. Using the weighted-average method, the equivalent units for direct materials for
November are:
A) 3,400 units
B) 4,400 units
C) 5,000 units
D) 6,000 units
Answer: D Level: Medium LO: 2 Source: CMA, adapted Appendix: 4
136. Using the weighted-average method, the equivalent units for conversion costs for
November are:
A) 3,400 units
B) 3,800 units
C) 4,000 units
D) 4,400 units
Answer: D Level: Medium LO: 2 Source: CMA, adapted Appendix: 4
Use the following to answer questions 137-138:
Qu Corporation uses the FIFO method in its process costing system. Data concerning the first
processing department for the most recent month are listed below:
Beginning work in process inventory:
Units in beginning work in process inventory ..................... 900
Materials costs ...................................................................... $9,800
Conversion costs .................................................................. $9,200
Percentage complete with respect to materials .................... 55%
Percentage complete with respect to conversion ................. 30%
Units started into production during the month ...................... 8,400
Materials costs added during the month .................................. $130,400
Conversion costs added during the month .............................. $220,600
Ending work in process inventory:
Units in ending work in process inventory .......................... 2,200
Percentage complete with respect to materials .................... 65%
Percentage complete with respect to conversion ................. 25%
Note: Your answers may differ from those offered below due to rounding error. In all cases,
select the answer that is the closest to the answer you computed. To reduce rounding error,
carry out all computations to at least three decimal places.
Chapter 4 Systems Design: Process Costing
180 Garrison, Managerial Accounting, 12th Edition
137. How many units were started AND completed during the month in the first processing
department?
A) 8,400
B) 7,100
C) 6,200
D) 9,300
Answer: C Level: Medium LO: 7 Appendix: 4
138. The cost per equivalent unit for conversion costs for the first department for the month
is closest to:
A) $29.89
B) $34.07
C) $31.07
D) $31.38
Answer: A Level: Medium LO: 6,8 Appendix: 4
Use the following to answer questions 139-145:
Mullins Corporation uses the FIFO method in its process costing system. Data concerning the
first processing department for the most recent month are listed below:
Beginning work in process inventory:
Units in beginning work in process inventory ..................... 700
Materials costs ...................................................................... $11,500
Conversion costs .................................................................. $22,200
Percentage complete with respect to materials .................... 75%
Percentage complete with respect to conversion ................. 65%
Units started into production during the month ...................... 8,600
Units transferred to the next department during the month .... 7,800
Materials costs added during the month .................................. $159,300
Conversion costs added during the month .............................. $348,500
Ending work in process inventory:
Units in ending work in process inventory .......................... 1,500
Percentage complete with respect to materials .................... 65%
Percentage complete with respect to conversion ................. 50%
Note: Your answers may differ from those offered below due to rounding error. In all cases,
select the answer that is the closest to the answer you computed. To reduce rounding error,
carry out all computations to at least three decimal places.
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 181
139. What are the equivalent units for materials for the month in the first processing
department?
A) 975
B) 8,250
C) 9,300
D) 7,100
Answer: B Level: Medium LO: 6 Appendix: 4
140. What are the equivalent units for conversion costs for the month in the first processing
department?
A) 8,095
B) 7,100
C) 9,300
D) 750
Answer: A Level: Medium LO: 6 Appendix: 4
141. The cost per equivalent unit for materials for the month in the first processing
department is closest to:
A) $20.42
B) $21.90
C) $19.31
D) $17.13
Answer: C Level: Medium LO: 8 Appendix: 4
142. The cost per equivalent unit for conversion costs for the first department for the month
is closest to:
A) $48.79
B) $45.20
C) $44.68
D) $43.05
Answer: D Level: Medium LO: 8 Appendix: 4
Chapter 4 Systems Design: Process Costing
182 Garrison, Managerial Accounting, 12th Edition
143. The cost per equivalent whole unit for the month in the first processing department is
closest to:
A) $62.36
B) $76.27
C) $66.10
D) $58.23
Answer: A Level: Medium LO: 8 Appendix: 4
144. The total cost transferred from the first processing department to the next processing
department during the month is closest to:
A) $490,382
B) $579,948
C) $507,800
D) $541,500
Answer: A Level: Medium LO: 9 Appendix: 4
145. The cost of ending work in process inventory in the first processing department
according to the company's cost system is closest to:
A) $51,114
B) $46,770
C) $93,540
D) $60,801
Answer: A Level: Medium LO: 9 Appendix: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 183
Use the following to answer questions 146-148:
Puri Corporation uses the FIFO method in its process costing system. Data concerning the
first processing department for the most recent month are listed below:
Beginning work in process inventory:
Units in beginning work in process inventory ....................... 400
Materials costs ........................................................................ $4,800
Conversion costs .................................................................... $3,300
Percentage complete with respect to materials ...................... 85%
Percentage complete with respect to conversion ................... 45%
Units started into production during the month ........................ 5,800
Units transferred to the next department during the month ...... 5,100
Materials costs added during the month .................................... $69,500
Conversion costs added during the month ................................ $82,300
Ending work in process inventory:
Units in ending work in process inventory ............................ 1,100
Percentage complete with respect to materials ...................... 55%
Percentage complete with respect to conversion ................... 45%
Note: Your answers may differ from those offered below due to rounding error. In all cases,
select the answer that is the closest to the answer you computed. To reduce rounding error,
carry out all computations to at least three decimal places.
146. What are the equivalent units for materials for the month in the first processing
department?
A) 605
B) 6,200
C) 4,700
D) 5,365
Answer: D Level: Medium LO: 6 Appendix: 4
147. The cost per equivalent unit for conversion costs for the first department for the month
is closest to:
A) $15.20
B) $18.33
C) $15.96
D) $16.14
Answer: A Level: Medium LO: 8 Appendix: 4
Chapter 4 Systems Design: Process Costing
184 Garrison, Managerial Accounting, 12th Edition
148. The total cost transferred from the first processing department to the next processing
department during the month is closest to:
A) $159,900
B) $151,800
C) $174,549
D) $144,540
Answer: D Level: Medium LO: 9 Appendix: 4
Use the following to answer questions 149-150:
Normand Corporation uses the FIFO method in its process costing system. Data concerning
the first processing department for the most recent month are listed below:
Beginning work in process inventory:
Units in beginning work in process inventory .......................... 700
Materials costs ........................................................................... $8,700
Conversion costs ....................................................................... $3,700
Percentage complete with respect to materials ......................... 70%
Percentage complete with respect to conversion ...................... 10%
Units started into production during the month ........................... 6,400
Units transferred to the next department during the month ......... 5,600
Materials costs added during the month ....................................... $92,200
Conversion costs added during the month ................................... $269,600
Ending work in process inventory:
Units in ending work in process inventory ............................... 1,500
Percentage complete with respect to materials ......................... 80%
Percentage complete with respect to conversion ...................... 25%
Note: Your answers may differ from those offered below due to rounding error. In all cases,
select the answer that is the closest to the answer you computed. To reduce rounding error,
carry out all computations to at least three decimal places.
149. What are the equivalent units for materials for the month in the first processing
department?
A) 4,900
B) 1,200
C) 6,310
D) 7,100
Answer: C Level: Medium LO: 6 Appendix: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 185
150. The cost per equivalent unit for conversion costs for the first department for the month
is closest to:
A) $45.66
B) $52.86
C) $47.94
D) $48.14
Answer: A Level: Medium LO: 8 Appendix: 4
Use the following to answer questions 151-152:
Ozdemir Corporation uses the FIFO method in its process costing system. Data concerning
the first processing department for the most recent month are listed below:
Beginning work in process inventory:
Units in beginning work in process inventory .......................... 200
Materials costs ........................................................................... $1,800
Conversion costs ....................................................................... $600
Percentage complete with respect to materials ......................... 55%
Percentage complete with respect to conversion ...................... 10%
Units started into production during the month ........................... 5,000
Units transferred to the next department during the month ......... 4,500
Materials costs added during the month ....................................... $74,800
Conversion costs added during the month ................................... $128,800
Ending work in process inventory:
Units in ending work in process inventory ............................... 700
Percentage complete with respect to materials ......................... 85%
Percentage complete with respect to conversion ...................... 70%
Note: Your answers may differ from those offered below due to rounding error. In all cases,
select the answer that is the closest to the answer you computed. To reduce rounding error,
carry out all computations to at least three decimal places.
151. What are the equivalent units for conversion costs for the month in the first processing
department?
A) 490
B) 4,300
C) 4,970
D) 5,200
Answer: C Level: Medium LO: 6 Appendix: 4
Chapter 4 Systems Design: Process Costing
186 Garrison, Managerial Accounting, 12th Edition
152. The cost per equivalent unit for materials for the month in the first processing
department is closest to:
A) $16.36
B) $14.38
C) $16.62
D) $15.01
Answer: D Level: Medium LO: 8 Appendix: 4
Use the following to answer questions 153-154:
The information below was obtained from the records of Bapst Company for the month of
May. The company uses the FIFO method in its process costing system.
Units
Labor and Overhead
Percent Complete
Work in process inventory, May 1 ............ 3,000 30%
Started into production .............................. 20,000
Work in process inventory, May 31 .......... 4,000 40%
All materials are added at the beginning of the manufacturing process.
153. The equivalent units for material for the month are:
A) 21,600 units
B) 22,500 units
C) 16,000 units
D) 20,000 units
Answer: D Level: Medium LO: 6 Appendix: 4
154. The equivalent units for labor and overhead for the month are:
A) 17,600 units
B) 18,500 units
C) 19,700 units
D) 21,600 units
Answer: C Level: Medium LO: 6 Appendix: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 187
Use the following to answer questions 155-157:
Marlan Manufacturing produces a product that passes through two processing departments.
The units from the Molding Department are completed in the Assembly Department. The
activity in the Assembly Department for the current month is presented below. Marlan uses
the FIFO method in its process costing system.
Units in beginning work in process inventory (materials 0%
complete; conversion 25% complete)........................................ 8,000
Units transferred in from the Molding Department during the
month ......................................................................................... 42,000
Units completed and transferred to finished goods ....................... 38,000
Units in ending work in process inventory (materials 0%
complete; conversion 40% complete)........................................ 12,000
155. The equivalent units (with respect to the Molding Department's costs) transferred from
the Molding Department to the Assembly during the month were:
A) 30,000 units
B) 38,000 units
C) 40,800 units
D) 42,000 units
Answer: D Level: Medium LO: 6 Source: CMA, adapted Appendix: 4
156. The equivalent units for materials for the Assembly Department during the month
were:
A) 30,000 units
B) 38,000 units
C) 40,800 units
D) 42,000 units
Answer: B Level: Medium LO: 6 Source: CMA, adapted Appendix: 4
157. The equivalent units for conversion costs for the Assembly Department during the
month were:
A) 36,800 units
B) 38,000 units
C) 40,800 units
D) 42,800 units
Answer: C Level: Medium LO: 6 Source: CMA, adapted Appendix: 4
Chapter 4 Systems Design: Process Costing
188 Garrison, Managerial Accounting, 12th Edition
Essay Questions
158. Anchor Inc. uses the weighted-average method in its process costing system. The
following data concern the operations of the company's first processing department for
a recent month.
Work in process, beginning:
Units in process ........................................................... 800
Stage of completion with respect to materials ............ 60%
Stage of completion with respect to conversion.......... 10%
Costs in the beginning inventory:
Materials cost ........................................................... $1,296
Conversion cost ........................................................ $2,416
Units started into production during the month .............. 16,000
Units completed and transferred out .............................. 16,500
Costs added to production during the month:
Materials cost .............................................................. $47,076
Conversion cost ........................................................... $497,213
Work in process, ending:
Units in process ........................................................... 300
Stage of completion with respect to materials ............ 60%
Stage of completion with respect to conversion.......... 70%
Required:
Prepare a production report for the department using the weighted-average method.
Level: Hard LO: 2,3,4,5
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 189
Answer:
Weighted Average method:
Quantity schedule and equivalent units
Quantity
Schedule
Units to be accounted for:
Work in process, beginning ............. 800
Started into production .................... 16,000
Total units accounted for .................... 16,800
Equivalent Units
Materials Conversion
Units accounted for as follows:
Transferred to next department ....... 16,500 16,500 16,500
Work in process, ending .................. 300 180 210
Total units ........................................... 16,800 16,680 16,710
Costs per equivalent unit
Total Cost Materials Conversion
Cost to be accounted for:
Work in process, beginning ............. $ 3,712 $ 1,296 $ 2,416
Cost added during the month .......... 544,289 47,076 497,213
Total cost (a) ....................................... $548,001 $48,372 $499,629
Equivalent units (above) (b) ............... 16,680 16,710
Cost per EU, (a) ÷ (b) ......................... $2.900 $29.900
Cost per whole unit $32.800
Cost reconciliation
Total Equivalent Units
Cost Materials Conversion
Cost accounted for as follows:
Transferred out ................................ $541,200 16,500 16,500
Work in process, ending:
Materials ....................................... 522 180
Conversion ................................... 6,279 210
Total work in process, ending ......... 6,801
Total cost ............................................ $548,001
Chapter 4 Systems Design: Process Costing
190 Garrison, Managerial Accounting, 12th Edition
159. Ayres Inc. uses the weighted-average method in its process costing system. The
following data concern the operations of the company's first processing department for
a recent month.
Work in process, beginning:
Units in process ........................................................... 300
Stage of completion with respect to materials ............ 60%
Stage of completion with respect to conversion.......... 60%
Costs in the beginning inventory:
Materials cost ........................................................... $1,314
Conversion cost ........................................................ $6,102
Units started into production during the month .............. 22,000
Units completed and transferred out .............................. 21,800
Costs added to production during the month:
Materials cost .............................................................. $164,436
Conversion cost ........................................................... $728,058
Work in process, ending:
Units in process ........................................................... 500
Stage of completion with respect to materials ............ 60%
Stage of completion with respect to conversion.......... 10%
Required:
Prepare a production report for the department using the weighted-average method.
Level: Hard LO: 2,3,4,5
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 191
Answer:
Weighted Average method:
Quantity schedule and equivalent units
Quantity
Schedule
Units to be accounted for:
Work in process, beginning ............. 300
Started into production .................... 22,000
Total units accounted for .................... 22,300
Equivalent Units
Materials Conversion
Units accounted for as follows:
Transferred to next department ....... 21,800 21,800 21,800
Work in process, ending .................. 500 300 50
Total units ........................................... 22,300 22,100 21,850
Costs per equivalent unit
Total Cost Materials Conversion
Cost to be accounted for:
Work in process, beginning ............. $ 7,416 $ 1,314 $ 6,102
Cost added during the month .......... 892,494 164,436 728,058
Total cost (a) ....................................... $899,910 $165,750 $734,160
Equivalent units (above) (b) ............... 22,100 21,850
Cost per EU, (a) ÷ (b) ......................... $7.500 $33.600
Cost per whole unit............................. $41.100
Cost reconciliation
Total Equivalent Units
Cost Materials Conversion
Cost accounted for as follows:
Transferred out ................................ $895,980 21,800 21,800
Work in process, ending:
Materials ....................................... 2,250 300
Conversion ................................... 1,680 50
Total work in process, ending ......... 3,930
Total cost ............................................ $899,910
Chapter 4 Systems Design: Process Costing
192 Garrison, Managerial Accounting, 12th Edition
160. Bae Inc. uses the weighted-average method in its process costing system. The
following data concern the operations of the company's first processing department for
a recent month.
Work in process, beginning:
Units in process ........................................................... 100
Stage of completion with respect to materials ............ 70%
Stage of completion with respect to conversion.......... 90%
Costs in the beginning inventory:
Materials cost ........................................................... $182
Conversion cost ........................................................ $3,429
Units started into production during the month .............. 10,000
Units completed and transferred out .............................. 9,700
Costs added to production during the month:
Materials cost .............................................................. $27,986
Conversion cost ........................................................... $373,815
Work in process, ending:
Units in process ........................................................... 400
Stage of completion with respect to materials ............ 90%
Stage of completion with respect to conversion.......... 70%
Required:
Using the weighted-average method:
a. Determine the equivalent units of production for materials and conversion costs.
b. Determine the cost per equivalent unit for materials and conversion costs.
c. Determine the cost of units transferred out of the department during the month.
d. Determine the cost of ending work in process inventory in the department.
Level: Hard LO: 2,3,4,5
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 193
Answer:
a. through d. The answers to all of the questions can be found by filling out a
production report as follows.
Quantity schedule and equivalent units
Quantity
Schedule
Units to be accounted for:
Work in process, beginning ............ 100
Started into production ................... 10,000
Total units accounted for ................... 10,100
Equivalent Units
Materials Conversion
Units accounted for as follows:
Transferred to next department ....... 9,700 9,700 9,700
Work in process, ending ................. 400 360 280
Total units .......................................... 10,100 10,060 9,980
Costs per equivalent unit
Total Cost Materials Conversion
Cost to be accounted for:
Work in process, beginning ............ $ 3,611 $ 182 $ 3,429
Cost added during the month .......... 401,801 27,986 373,815
Total cost (a) ...................................... $405,412 $28,168 $377,244
Equivalent units (above) (b) .............. 10,060 9,980
Cost per EU, (a) ÷ (b) ........................ $2.800 $37.800
Cost per whole unit ............................ $40.600
Cost reconciliation
Total Equivalent Units
Cost Materials Conversion
Cost accounted for as follows:
Transferred out ................................ $393,820 9,700 9,700
Work in process, ending:
Materials ...................................... 1,008 360
Conversion ................................... 10,584 280
Total work in process, ending ......... 11,592
Total cost ............................................ $405,412
Chapter 4 Systems Design: Process Costing
194 Garrison, Managerial Accounting, 12th Edition
161. Banerjee Inc. uses the weighted-average method in its process costing system. The
following data concern the operations of the company's first processing department for
a recent month.
Work in process, beginning:
Units in process ........................................................... 200
Stage of completion with respect to materials ............ 60%
Stage of completion with respect to conversion.......... 20%
Costs in the beginning inventory:
Materials cost ........................................................... $756
Conversion cost ........................................................ $1,508
Units started into production during the month .............. 18,000
Units completed and transferred out .............................. 17,700
Costs added to production during the month:
Materials cost .............................................................. $116,569
Conversion cost ........................................................... $675,432
Work in process, ending:
Units in process ........................................................... 500
Stage of completion with respect to materials ............ 70%
Stage of completion with respect to conversion.......... 80%
Required:
Using the weighted-average method:
a. Determine the equivalent units of production for materials and conversion costs.
b. Determine the cost per equivalent unit for materials and conversion costs.
c. Determine the cost of units transferred out of the department during the month.
d. Determine the cost of ending work in process inventory in the department.
Level: Hard LO: 2,3,4,5
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 195
Answer:
a. through d. The answers to all of the questions can be found by filling out a
production report as follows.
Quantity schedule and equivalent units
Quantity
Schedule
Units to be accounted for:
Work in process, beginning ............. 200
Started into production .................... 18,000
Total units accounted for .................... 18,200
Equivalent Units
Materials Conversion
Units accounted for as follows:
Transferred to next department ....... 17,700 17,700 17,700
Work in process, ending .................. 500 350 400
Total units ........................................... 18,200 18,050 18,100
Costs per equivalent unit
Total Cost Materials Conversion
Cost to be accounted for:
Work in process, beginning ............. $ 2,264 $ 756 $ 1,508
Cost added during the month .......... 792,001 116,569 675,432
Total cost (a) ....................................... $794,265 $117,325 $676,940
Equivalent units (above) (b) ............... 18,050 18,100
Cost per EU, (a) ÷ (b) ......................... $6.500 $37.400
Cost per whole unit............................. $43.900
Cost reconciliation
Total Equivalent Units
Cost Materials Conversion
Cost accounted for as follows:
Transferred out ................................ $777,030 17,700 17,700
Work in process, ending:
Materials ....................................... $2,275 350
Conversion ................................... 14,960 400
Total work in process, ending ......... 17,235
Total cost ............................................ $794,265
Chapter 4 Systems Design: Process Costing
196 Garrison, Managerial Accounting, 12th Edition
162. Cagna Inc. uses the weighted-average method in its process costing system. The
following data concern the operations of the company's first processing department for
a recent month.
Work in process, beginning:
Units in process ............................................................ 700
Stage of completion with respect to materials ............. 90%
Stage of completion with respect to conversion........... 10%
Units started into production during the month ............... 15,000
Work in process, ending:
Units in process ............................................................ 500
Stage of completion with respect to materials ............. 50%
Stage of completion with respect to conversion........... 40%
Required:
Using the weighted-average method, determine the equivalent units of production for
materials and conversion costs by compiling the “Quantity Schedule and Equivalent
Units” portion of the production report.
Level: Medium LO: 2,3
Answer:
Quantity schedule and equivalent units
Quantity
Schedule
Units to be accounted for:
Work in process, beginning ............. 700
Started into production .................... 15,000
Total units accounted for .................... 15,700
Equivalent Units
Materials Conversion
Units accounted for as follows:
Transferred to next department ....... 15,200 15,200 15,200
Work in process, ending .................. 500 250 200
Total units ........................................... 15,700 15,450 15,400
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 197
163. Callet Inc. uses the weighted-average method in its process costing system. The
following data concern the operations of the company's first processing department for
a recent month.
Work in process, beginning:
Units in process ............................................................ 500
Stage of completion with respect to materials ............. 90%
Stage of completion with respect to conversion........... 70%
Units started into production during the month ............... 23,000
Work in process, ending:
Units in process ............................................................ 400
Stage of completion with respect to materials ............. 80%
Stage of completion with respect to conversion........... 90%
Required:
Using the weighted-average method, determine the equivalent units of production for
materials and conversion costs by compiling the “Quantity Schedule and Equivalent
Units” portion of the production report.
Level: Medium LO: 2,3
Answer:
Quantity schedule and equivalent units
Quantity
Schedule
Units to be accounted for:
Work in process, beginning .................. 500
Started into production ......................... 23,000
Total units accounted for ......................... 23,500
Equivalent Units
Materials Conversion
Units accounted for as follows:
Transferred to next department ............ 23,100 23,100 23,100
Work in process, ending ....................... 400 320 360
Total units ................................................ 23,500 23,420 23,460
Chapter 4 Systems Design: Process Costing
198 Garrison, Managerial Accounting, 12th Edition
164. Dachuna Inc. uses the FIFO method in its process costing system. The following data
concern the operations of the company's first processing department for a recent
month.
Work in process, beginning:
Units in process ................................................................ 500
Stage of completion with respect to materials ................. 60%
Stage of completion with respect to conversion............... 70%
Costs in the beginning inventory:
Materials cost ................................................................ $1,020
Conversion cost ............................................................. $8,925
Units started into production during the month ................... 10,000
Units completed and transferred out ................................... 9,600
Costs added to production during the month:
Materials cost ................................................................... $31,488
Conversion cost ................................................................ $259,548
Work in process, ending:
Units in process ................................................................ 900
Stage of completion with respect to materials ................. 60%
Stage of completion with respect to conversion............... 90%
Required:
Prepare a production report for the department using the FIFO method.
Level: Hard LO: 6,7,8,9 Appendix: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 199
Answer:
Quantity Schedule and Equivalent Units
Quantity
Schedule
Units to be accounted for:
Work in process, beginning .................. 500
Started into production ......................... 10,000
Total units to be accounted for ................ 10,500
Equivalent Units
Materials Conversion
Units accounted for as follows:
Transferred out:
From the beginning inventory ........... 500 200 150
Started and completed ....................... 9,100 9,100 9,100
Work in process, ending ....................... 900 540 810
Total units accounted for ......................... 10,500 9,840 10,060
Costs per Equivalent Unit
Total
Cost Materials Conversion
Cost to be accounted for:
Work in process, beginning .................. $ 9,945
Cost added during the month (a) .......... 291,036 $31,488 $259,548
Total cost to be accounted for ................. $300,981
Equivalent units (above) (b) .................... 9,840 10,060
Cost per EU, (a) ÷ (b) .............................. $3.200 $25.800
Cost per whole unit.................................. $29.000
Cost Reconciliation
Total Equivalent Units
Cost Materials Conversion
Cost accounted for as follows:
Transferred out:
From the beginning inventory:
Cost in the beginning inventory ..... $ 9,945
Cost to complete these units:
Materials ..................................... 640 200
Conversion .................................. 3,870 150
Total cost from beginning inventory . 14,455
Units started and completed .............. 263,900 9,100 9,100
Total cost transferred out...................... 278,355
Chapter 4 Systems Design: Process Costing
200 Garrison, Managerial Accounting, 12th Edition
Work in process, ending:
Materials ............................................ 1,728 540
Conversion ........................................ 20,898 810
Total work in process, ending .............. 22,626
Total cost accounted for .......................... $300,981
165. Dahal Inc. uses the FIFO method in its process costing system. The following data
concern the operations of the company's first processing department for a recent
month.
Work in process, beginning:
Units in process ................................................................ 900
Stage of completion with respect to materials ................. 80%
Stage of completion with respect to conversion............... 90%
Costs in the beginning inventory:
Materials cost ................................................................ $1,008
Conversion cost ............................................................. $27,621
Units started into production during the month ................... 19,000
Units completed and transferred out ................................... 19,700
Costs added to production during the month:
Materials cost ................................................................... $22,992
Conversion cost ................................................................ $650,504
Work in process, ending:
Units in process ................................................................ 200
Stage of completion with respect to materials ................. 90%
Stage of completion with respect to conversion............... 10%
Required:
Prepare a production report for the department using the FIFO method.
Level: Hard LO: 6,7,8,9 Appendix: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 201
Answer:
Quantity Schedule and Equivalent Units
Quantity
Schedule
Units to be accounted for:
Work in process, beginning .................. 900
Started into production ......................... 19,000
Total units to be accounted for ................ 19,900
Equivalent Units
Materials Conversion
Units accounted for as follows:
Transferred out:
From the beginning inventory ........... 900 180 90
Started and completed ....................... 18,800 18,800 18,800
Work in process, ending ....................... 200 180 20
Total units accounted for ......................... 19,900 19,160 18,910
Costs per Equivalent Unit
Total
Cost Materials Conversion
Cost to be accounted for:
Work in process, beginning .................. $ 28,629
Cost added during the month (a) .......... 673,496 $22,992 $650,504
Total cost to be accounted for ................. $702,125
Equivalent units (above) (b) .................... 19,160 18,910
Cost per EU, (a) ÷ (b) .............................. $1.20 $34.40
Cost per whole unit.................................. $35.60
Cost Reconciliation
Total Equivalent Units
Cost Materials Conversion
Cost accounted for as follows:
Transferred out:
From the beginning inventory:
Cost in the beginning inventory ..... $ 28,629
Cost to complete these units:
Materials ..................................... 216 180
Conversion .................................. 3,096 90
Total cost from beginning inventory . 31,941
Units started and completed .............. 669,280 18,800 18,800
Total cost transferred out...................... 701,221
Chapter 4 Systems Design: Process Costing
202 Garrison, Managerial Accounting, 12th Edition
Work in process, ending:
Materials ............................................ 216 180
Conversion ........................................ 688 20
Total work in process, ending .............. 904
Total cost accounted for .......................... $702,125
166. Ebert Inc. uses the FIFO method in its process costing system. The following data
concern the operations of the company's first processing department for a recent
month.
Work in process, beginning:
Units in process ................................................................ 600
Stage of completion with respect to materials ................. 60%
Stage of completion with respect to conversion............... 70%
Costs in the beginning inventory:
Materials cost ................................................................ $1,188
Conversion cost ............................................................. $16,548
Units started into production during the month ................... 18,000
Units completed and transferred out ................................... 18,400
Costs added to production during the month:
Materials cost ................................................................... $56,234
Conversion cost ................................................................ $715,394
Work in process, ending:
Units in process ................................................................ 200
Stage of completion with respect to materials ................. 50%
Stage of completion with respect to conversion............... 20%
Required:
Using the FIFO method:
a. Determine the equivalent units of production for materials and conversion costs.
b. Determine the cost per equivalent unit for materials and conversion costs.
c. Determine the cost of units transferred out of the department during the month.
d. Determine the cost of ending work in process inventory in the department.
Level: Hard LO: 6,7,8,9 Appendix: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 203
Answer:
a. through d. can be answered by completing a production report as follows:
Quantity Schedule and Equivalent Units
Quantity
Schedule
Units to be accounted for:
Work in process, beginning .................. 600
Started into production ......................... 18,000
Total units to be accounted for ................ 18,600
Equivalent Units
Materials Conversion
Units accounted for as follows:
Transferred out:
From the beginning inventory ........... 600 240 180
Started and completed ....................... 17,800 17,800 17,800
Work in process, ending ....................... 200 100 40
Total units accounted for ......................... 18,600 18,140 18,020
Costs per Equivalent Unit
Total
Cost Materials Conversion
Cost to be accounted for:
Work in process, beginning .................. $ 17,736
Cost added during the month (a) .......... 771,628 $56,234 $715,394
Total cost to be accounted for ................. $789,364
Equivalent units (above) (b) .................... 18,140 18,020
Cost per EU, (a) ÷ (b) .............................. $3.10 $39.70
Cost per whole unit.................................. $42.80
Chapter 4 Systems Design: Process Costing
204 Garrison, Managerial Accounting, 12th Edition
Cost Reconciliation
Total Equivalent Units
Cost Materials Conversion
Cost accounted for as follows:
Transferred out:
From the beginning inventory:
Cost in the beginning inventory ..... $ 17,736
Cost to complete these units:
Materials ..................................... 744 240
Conversion .................................. 7,146 180
Total cost from beginning inventory . 25,626
Units started and completed .............. 761,840 17,800 17,800
Total cost transferred out...................... 787,466
Work in process, ending:
Materials ............................................ 310 100
Conversion ........................................ 1,588 40
Total work in process, ending .............. 1,898
Total cost accounted for .......................... $789,364
167. Edwards Inc. uses the FIFO method in its process costing system. The following data
concern the operations of the company's first processing department for a recent
month.
Work in process, beginning:
Units in process ................................................................ 100
Stage of completion with respect to materials ................. 50%
Stage of completion with respect to conversion............... 90%
Costs in the beginning inventory:
Materials cost ................................................................ $260
Conversion cost ............................................................. $3,366
Units started into production during the month ................... 20,000
Units completed and transferred out ................................... 19,800
Costs added to production during the month:
Materials cost ................................................................... $99,650
Conversion cost ................................................................ $745,329
Work in process, ending:
Units in process ................................................................ 300
Stage of completion with respect to materials ................. 60%
Stage of completion with respect to conversion............... 20%
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 205
Required:
Using the FIFO method:
a. Determine the equivalent units of production for materials and conversion costs.
b. Determine the cost per equivalent unit for materials and conversion costs.
c. Determine the cost of units transferred out of the department during the month.
d. Determine the cost of ending work in process inventory in the department.
Level: Hard LO: 6,7,8,9 Appendix: 4
Answer:
a. through d. can be answered by completing a production report as follows:
Quantity Schedule and Equivalent Units
Quantity
Schedule
Units to be accounted for:
Work in process, beginning .................. 100
Started into production ......................... 20,000
Total units to be accounted for ................ 20,100
Equivalent Units
Materials Conversion
Units accounted for as follows:
Transferred out:
From the beginning inventory ........... 100 50 10
Started and completed ....................... 19,700 19,700 19,700
Work in process, ending ....................... 300 180 60
Total units accounted for ......................... 20,100 19,930 19,770
Costs per Equivalent Unit
Total
Cost Materials Conversion
Cost to be accounted for:
Work in process, beginning .................. $ 3,626
Cost added during the month (a) .......... 844,979 $99,650 $745,329
Total cost to be accounted for ................. $848,605
Equivalent units (above) (b) .................... 19,930 19,770
Cost per EU, (a) ÷ (b) .............................. $5.00 $37.70
Cost per whole unit.................................. $42.70
Chapter 4 Systems Design: Process Costing
206 Garrison, Managerial Accounting, 12th Edition
Cost Reconciliation
Total Equivalent Units
Cost Materials Conversion
Cost accounted for as follows:
Transferred out:
From the beginning inventory:
Cost in the beginning inventory ..... $ 3,626
Cost to complete these units:
Materials ..................................... 250 50
Conversion .................................. 377 10
Total cost from beginning inventory . 4,253
Units started and completed .............. 841,190 19,700 19,700
Total cost transferred out...................... 845,443
Work in process, ending:
Materials ............................................ 900 180
Conversion ........................................ 2,262 60
Total work in process, ending .............. 3,162
Total cost accounted for .......................... $848,605
168. Fuller Inc. uses the FIFO method in its process costing system. The following data
concern the operations of the company's first processing department for a recent
month.
Work in process, beginning:
Units in process ................................................................ 300
Stage of completion with respect to materials ................. 70%
Stage of completion with respect to conversion............... 50%
Units started into production during the month ................... 25,000
Work in process, ending:
Units in process ................................................................ 300
Stage of completion with respect to materials ................. 80%
Stage of completion with respect to conversion............... 20%
Required:
Using the FIFO method, determine the equivalent units of production for materials and
conversion costs by compiling the “Quantity Schedule and Equivalent Units” portion
of the production report.
Level: Medium LO: 6,7 Appendix: 4
Chapter 4 Systems Design: Process Costing
Garrison, Managerial Accounting, 12th Edition 207
Answer:
Quantity Schedule and Equivalent Units
Quantity
Schedule
Units to be accounted for:
Work in process, beginning .................. 300
Started into production ......................... 25,000
Total units to be accounted for ................ 25,300
Equivalent Units
Materials Conversion
Units accounted for as follows:
Transferred out:
From the beginning inventory ........... 300 90 150
Started and completed ....................... 24,700 24,700 24,700
Work in process, ending ....................... 300 240 60
Total units accounted for ......................... 25,300 25,030 24,910
169. Fulghieri Inc. uses the FIFO method in its process costing system. The following data
concern the operations of the company's first processing department for a recent
month.
Work in process, beginning:
Units in process ................................................................ 600
Stage of completion with respect to materials ................. 70%
Stage of completion with respect to conversion............... 10%
Units started into production during the month ................... 10,000
Work in process, ending:
Units in process ................................................................ 400
Stage of completion with respect to materials ................. 70%
Stage of completion with respect to conversion............... 20%
Required:
Using the FIFO method, determine the equivalent units of production for materials and
conversion costs by compiling the “Quantity Schedule and Equivalent Units” portion
of the production report.
Level: Medium LO: 6,7 Appendix: 4
Chapter 4 Systems Design: Process Costing
208 Garrison, Managerial Accounting, 12th Edition
No comments:
Post a Comment